Press Release Forum [] Forum Index

Press Release Forum []
Free Press Release Distribution

A site of EPR Network

 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Real Time Press Release Distribution is here. Try it out, it's free!


Official Launch of the PolyStyreneLoop Project

Post new topic   Reply to topic    Press Release Forum [] Forum Index -> General Press Releases
View previous topic :: View next topic  
Author Message

Joined: 15 Nov 2007
Posts: 8104

PostPosted: Tue Nov 14, 2017 3:00 am    Post subject: Official Launch of the PolyStyreneLoop Project Reply with quote

On 7 November, the PolyStyreneLoop (PSL) Cooperative inaugurated the European EPS/XPS industry’s closed-loop solution for the recycling of polystyrene (PS) insulation foam waste in Amsterdam. This innovative project employs a ground-breaking technology (Creasolv® Process) to dissolve PS foam waste, while also allowing for the extraction and recovery of bromine from the recently restricted flame retardant chemical, HBCD, which can then be used again for the production of new flame retardants.

Terneuzen, Netherlands., November 13, 2017 -- As an industrial pioneer in the push for a circular economy, the PSL project will help the EU deal with an expected 20 million tonnes of insulation material containing HBCD that will need to be disposed of in the next 50 years.

Mr Paolo Sandri, speaking on behalf of the Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs of the European Commission, explained that these legacy chemicals are “one of the challenges on our way to circularity”. He praised the PSL project by stating it is a “significant breakthrough” adding that “the project is an essential contribution to the EU’s efforts to develop a sustainable, low carbon, resource efficient and competitive economy. It ticks all the boxes of the circular economy.”

Mr Cees Luttikhuizen, representing the Dutch Ministry of Infrastructure and the Environment, praised the cooperation between the industry and the Dutch authorities. He welcomed the initiative of such a project that links the entire value chain together. In this unique endeavour, industry partners covering the upstream to the downstream are proactively working to solve the future waste stream issue and providing a solution for the next 50 years.

Representing Plastics Europe, Mr Christian Block was proud of the new initiative by the Polystrene value chain that brings together 56 members and supporters of the PolyStyreneLoop Cooperative, and also believes it will lead to a sustainable solution for the integrated waste management of polystyrene.

Recycling PS foam by the PSL process typically saves as much as 50% CO2 emissions (compared to using it for energy recovery). There is no doubt that this technology offers an additional contribution to resource efficiency at the end-of-life phase for PS foam insulation, on top of the CO2 emissions already saved by reducing energy consumption during the long-use phase in the form of building insulation.

The Polystyrene Loop process is just one example of the EPS/XPS industry rising to the waste challenges it faces voluntarily. In fact, the technology on which PS Loop is based was accepted by the UN Basel convention as a best available technology for the pretreatment of waste containing POPs. “It encourages industry-led and market-based initiatives to be carried out with all partners along the value chain. It is a signal to other polymer producers that the cooperation can lead to more circularity and sustainability,” Sandri noted.

In addition to being financially supported by the EU, the PS supply chain (made up mostly of SMEs) has pulled together to raise the necessary equity to build the first demonstration plant in the Netherlands.

The PolyStyreneLoop demonstration plant aims to begin operations in 2018 and will have the capacity to treat up to 3300 tonnes of PS waste per year. Once up and running, the PolyStyreneLoop project will be able to cope with incoming PS foam waste streams and produce high quality recyclate that could be used in new PS foam insulation.

In terms of the project’s impact at the EU level, Sandri concluded, “it is an inspiring best practice to feed the forthcoming Plastics Strategy.”

For more information, please contact
Lein Tange or Jan Noordegraaf
Directors of the PolyStyreneLoop Cooperative

N. Mulder
Zeedijk 25 ETTEN LEUR
Terneuzen, Netherlands
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Press Release Forum [] Forum Index -> General Press Releases All times are GMT - 4 Hours
Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Submit Press Release (Free)Submit Press Release


Editor's pick: